py : switch to snake_case (#8305)

* py : switch to snake_case

ggml-ci

* cont

ggml-ci

* cont

ggml-ci

* cont : fix link

* gguf-py : use snake_case in scripts entrypoint export

* py : rename requirements for convert_legacy_llama.py

Needed for scripts/check-requirements.sh

---------

Co-authored-by: Francis Couture-Harpin <git@compilade.net>

README.md

@@ -26,7 +26,7 @@ Inference of Meta's [LLaMA](https://arxiv.org/abs/2302.13971) model (and others)
 
 ### Hot topics
 
-- **`convert.py` has been deprecated and moved to `examples/convert-legacy-llama.py`, please use `convert-hf-to-gguf.py`** https://github.com/ggerganov/llama.cpp/pull/7430
+- **`convert.py` has been deprecated and moved to `examples/convert_legacy_llama.py`, please use `convert_hf_to_gguf.py`** https://github.com/ggerganov/llama.cpp/pull/7430
 - Initial Flash-Attention support: https://github.com/ggerganov/llama.cpp/pull/5021
 - BPE pre-tokenization support has been added: https://github.com/ggerganov/llama.cpp/pull/6920
 - MoE memory layout has been updated - reconvert models for `mmap` support and regenerate `imatrix` https://github.com/ggerganov/llama.cpp/pull/6387
@@ -636,8 +636,8 @@ Building the program with BLAS support may lead to some performance improvements
 
 To obtain the official LLaMA 2 weights please see the <a href="#obtaining-and-using-the-facebook-llama-2-model">Obtaining and using the Facebook LLaMA 2 model</a> section. There is also a large selection of pre-quantized `gguf` models available on Hugging Face.
 
-Note: `convert.py` has been moved to `examples/convert-legacy-llama.py` and shouldn't be used for anything other than `Llama/Llama2/Mistral` models and their derivatives.
-It does not support LLaMA 3, you can use `convert-hf-to-gguf.py` with LLaMA 3 downloaded from Hugging Face.
+Note: `convert.py` has been moved to `examples/convert_legacy_llama.py` and shouldn't be used for anything other than `Llama/Llama2/Mistral` models and their derivatives.
+It does not support LLaMA 3, you can use `convert_hf_to_gguf.py` with LLaMA 3 downloaded from Hugging Face.
 
 ```bash
 # obtain the official LLaMA model weights and place them in ./models
@@ -654,7 +654,7 @@ ls ./models
 python3 -m pip install -r requirements.txt
 
 # convert the model to ggml FP16 format
-python3 convert-hf-to-gguf.py models/mymodel/
+python3 convert_hf_to_gguf.py models/mymodel/
 
 # quantize the model to 4-bits (using Q4_K_M method)
 ./llama-quantize ./models/mymodel/ggml-model-f16.gguf ./models/mymodel/ggml-model-Q4_K_M.gguf Q4_K_M

ci/run.sh

@@ -287,7 +287,7 @@ function gg_run_open_llama_7b_v2 {
     (time cmake -DCMAKE_BUILD_TYPE=Release ${CMAKE_EXTRA} -DGGML_CUDA=1 .. ) 2>&1 | tee -a $OUT/${ci}-cmake.log
     (time make -j                                                           ) 2>&1 | tee -a $OUT/${ci}-make.log
 
-    python3 ../examples/convert-legacy-llama.py ${path_models} --outfile ${path_models}/ggml-model-f16.gguf
+    python3 ../examples/convert_legacy_llama.py ${path_models} --outfile ${path_models}/ggml-model-f16.gguf
 
     model_f16="${path_models}/ggml-model-f16.gguf"
     model_q8_0="${path_models}/ggml-model-q8_0.gguf"
@@ -421,7 +421,7 @@ function gg_run_pythia_1_4b {
     (time cmake -DCMAKE_BUILD_TYPE=Release ${CMAKE_EXTRA} .. ) 2>&1 | tee -a $OUT/${ci}-cmake.log
     (time make -j                                            ) 2>&1 | tee -a $OUT/${ci}-make.log
 
-    python3 ../convert-hf-to-gguf.py ${path_models} --outfile ${path_models}/ggml-model-f16.gguf
+    python3 ../convert_hf_to_gguf.py ${path_models} --outfile ${path_models}/ggml-model-f16.gguf
 
     model_f16="${path_models}/ggml-model-f16.gguf"
     model_q8_0="${path_models}/ggml-model-q8_0.gguf"
@@ -553,7 +553,7 @@ function gg_run_pythia_2_8b {
     (time cmake -DCMAKE_BUILD_TYPE=Release ${CMAKE_EXTRA} -DGGML_CUDA=1 .. ) 2>&1 | tee -a $OUT/${ci}-cmake.log
     (time make -j                                                           ) 2>&1 | tee -a $OUT/${ci}-make.log
 
-    python3 ../convert-hf-to-gguf.py ${path_models} --outfile ${path_models}/ggml-model-f16.gguf
+    python3 ../convert_hf_to_gguf.py ${path_models} --outfile ${path_models}/ggml-model-f16.gguf
 
     model_f16="${path_models}/ggml-model-f16.gguf"
     model_q8_0="${path_models}/ggml-model-q8_0.gguf"

convert_hf_to_gguf.py

@@ -404,7 +404,7 @@ class Model:
 
         return tokens, toktypes, tokpre
 
-    # NOTE: this function is generated by convert-hf-to-gguf-update.py
+    # NOTE: this function is generated by convert_hf_to_gguf_update.py
     #       do not modify it manually!
     # ref:  https://github.com/ggerganov/llama.cpp/pull/6920
     # Marker: Start get_vocab_base_pre
@@ -424,7 +424,7 @@ class Model:
 
         res = None
 
-        # NOTE: if you get an error here, you need to update the convert-hf-to-gguf-update.py script
+        # NOTE: if you get an error here, you need to update the convert_hf_to_gguf_update.py script
         #       or pull the latest version of the model from Huggingface
         #       don't edit the hashes manually!
         if chkhsh == "0ef9807a4087ebef797fc749390439009c3b9eda9ad1a097abbe738f486c01e5":
@@ -499,9 +499,9 @@ class Model:
             logger.warning("**************************************************************************************")
             logger.warning("** WARNING: The BPE pre-tokenizer was not recognized!")
             logger.warning("**          There are 2 possible reasons for this:")
-            logger.warning("**          - the model has not been added to convert-hf-to-gguf-update.py yet")
+            logger.warning("**          - the model has not been added to convert_hf_to_gguf_update.py yet")
             logger.warning("**          - the pre-tokenization config has changed upstream")
-            logger.warning("**          Check your model files and convert-hf-to-gguf-update.py and update them accordingly.")
+            logger.warning("**          Check your model files and convert_hf_to_gguf_update.py and update them accordingly.")
             logger.warning("** ref:     https://github.com/ggerganov/llama.cpp/pull/6920")
             logger.warning("**")
             logger.warning(f"** chkhsh:  {chkhsh}")

convert_hf_to_gguf_update.py

@@ -2,7 +2,7 @@
 # -*- coding: utf-8 -*-
 
 # This script downloads the tokenizer models of the specified models from Huggingface and
-# generates the get_vocab_base_pre() function for convert-hf-to-gguf.py
+# generates the get_vocab_base_pre() function for convert_hf_to_gguf.py
 #
 # This is necessary in order to analyze the type of pre-tokenizer used by the model and
 # provide the necessary information to llama.cpp via the GGUF header in order to implement
@@ -15,9 +15,9 @@
 # - Add a new model to the "models" list
 # - Run the script with your huggingface token:
 #
-#   python3 convert-hf-to-gguf-update.py <huggingface_token>
+#   python3 convert_hf_to_gguf_update.py <huggingface_token>
 #
-# - Copy-paste the generated get_vocab_base_pre() function into convert-hf-to-gguf.py
+# - Copy-paste the generated get_vocab_base_pre() function into convert_hf_to_gguf.py
 # - Update llama.cpp with the new pre-tokenizer if necessary
 #
 # TODO: generate tokenizer tests for llama.cpp
@@ -37,7 +37,7 @@ from enum import IntEnum, auto
 from transformers import AutoTokenizer
 
 logging.basicConfig(level=logging.DEBUG)
-logger = logging.getLogger("convert-hf-to-gguf-update")
+logger = logging.getLogger("convert_hf_to_gguf_update")
 sess = requests.Session()
 
 
@@ -56,10 +56,10 @@ if len(sys.argv) == 2:
     token = sys.argv[1]
     if not token.startswith("hf_"):
         logger.info("Huggingface token seems invalid")
-        logger.info("Usage: python convert-hf-to-gguf-update.py <huggingface_token>")
+        logger.info("Usage: python convert_hf_to_gguf_update.py <huggingface_token>")
         sys.exit(1)
 else:
-    logger.info("Usage: python convert-hf-to-gguf-update.py <huggingface_token>")
+    logger.info("Usage: python convert_hf_to_gguf_update.py <huggingface_token>")
     sys.exit(1)
 
 # TODO: add models here, base models preferred
@@ -134,7 +134,7 @@ for model in models:
         logger.error(f"Failed to download model {model['name']}. Error: {e}")
 
 
-# generate the source code for the convert-hf-to-gguf.py:get_vocab_base_pre() function:
+# generate the source code for the convert_hf_to_gguf.py:get_vocab_base_pre() function:
 
 src_ifs = ""
 for model in models:
@@ -201,7 +201,7 @@ src_func = f"""
 
         res = None
 
-        # NOTE: if you get an error here, you need to update the convert-hf-to-gguf-update.py script
+        # NOTE: if you get an error here, you need to update the convert_hf_to_gguf_update.py script
         #       or pull the latest version of the model from Huggingface
         #       don't edit the hashes manually!
 {src_ifs}
@@ -210,9 +210,9 @@ src_func = f"""
             logger.warning("**************************************************************************************")
             logger.warning("** WARNING: The BPE pre-tokenizer was not recognized!")
             logger.warning("**          There are 2 possible reasons for this:")
-            logger.warning("**          - the model has not been added to convert-hf-to-gguf-update.py yet")
+            logger.warning("**          - the model has not been added to convert_hf_to_gguf_update.py yet")
             logger.warning("**          - the pre-tokenization config has changed upstream")
-            logger.warning("**          Check your model files and convert-hf-to-gguf-update.py and update them accordingly.")
+            logger.warning("**          Check your model files and convert_hf_to_gguf_update.py and update them accordingly.")
             logger.warning("** ref:     https://github.com/ggerganov/llama.cpp/pull/6920")
             logger.warning("**")
             logger.warning(f"** chkhsh:  {{chkhsh}}")
@@ -226,7 +226,7 @@ src_func = f"""
         return res
 """
 
-convert_py_pth = pathlib.Path("convert-hf-to-gguf.py")
+convert_py_pth = pathlib.Path("convert_hf_to_gguf.py")
 convert_py = convert_py_pth.read_text(encoding="utf-8")
 convert_py = re.sub(
     r"(# Marker: Start get_vocab_base_pre)(.+?)( +# Marker: End get_vocab_base_pre)",
@@ -237,7 +237,7 @@ convert_py = re.sub(
 
 convert_py_pth.write_text(convert_py, encoding="utf-8")
 
-logger.info("+++ convert-hf-to-gguf.py was updated")
+logger.info("+++ convert_hf_to_gguf.py was updated")
 
 # generate tests for each tokenizer model
 
@@ -343,6 +343,6 @@ logger.info("\nRun the following commands to generate the vocab files for testin
 for model in models:
     name = model["name"]
 
-    print(f"python3 convert-hf-to-gguf.py models/tokenizers/{name}/ --outfile models/ggml-vocab-{name}.gguf --vocab-only") # noqa: NP100
+    print(f"python3 convert_hf_to_gguf.py models/tokenizers/{name}/ --outfile models/ggml-vocab-{name}.gguf --vocab-only") # noqa: NP100
 
 logger.info("\n")

docs/HOWTO-add-model.md

@@ -17,7 +17,7 @@ Also, it is important to check that the examples and main ggml backends (CUDA, M
 ### 1. Convert the model to GGUF
 
 This step is done in python with a `convert` script using the [gguf](https://pypi.org/project/gguf/) library.
-Depending on the model architecture, you can use either [convert-hf-to-gguf.py](../convert-hf-to-gguf.py) or [examples/convert-legacy-llama.py](../examples/convert-legacy-llama.py) (for `llama/llama2` models in `.pth` format).
+Depending on the model architecture, you can use either [convert_hf_to_gguf.py](../convert_hf_to_gguf.py) or [examples/convert_legacy_llama.py](../examples/convert_legacy_llama.py) (for `llama/llama2` models in `.pth` format).
 
 The convert script reads the model configuration, tokenizer, tensor names+data and converts them to GGUF metadata and tensors.
 

examples/json_schema_pydantic_example.py

@@ -1,7 +1,7 @@
 # Usage:
 #! ./llama-server -m some-model.gguf &
 #! pip install pydantic
-#! python json-schema-pydantic-example.py
+#! python json_schema_pydantic_example.py
 
 from pydantic import BaseModel, Extra, TypeAdapter
 from annotated_types import MinLen

examples/llava/MobileVLM-README.md

@@ -30,16 +30,16 @@ git clone https://huggingface.co/mtgv/MobileVLM-1.7B
 git clone https://huggingface.co/openai/clip-vit-large-patch14-336
 ```
 
-2. Use `llava-surgery.py` to split the LLaVA model to LLaMA and multimodel projector constituents:
+2. Use `llava_surgery.py` to split the LLaVA model to LLaMA and multimodel projector constituents:
 
 ```sh
-python ./examples/llava/llava-surgery.py -m path/to/MobileVLM-1.7B
+python ./examples/llava/llava_surgery.py -m path/to/MobileVLM-1.7B
 ```
 
-3. Use `convert-image-encoder-to-gguf.py` with `--projector-type ldp` (for **V2** please use `--projector-type ldpv2`) to convert the LLaVA image encoder to GGUF:
+3. Use `convert_image_encoder_to_gguf.py` with `--projector-type ldp` (for **V2** please use `--projector-type ldpv2`) to convert the LLaVA image encoder to GGUF:
 
 ```sh
-python ./examples/llava/convert-image-encoder-to-gguf \
+python ./examples/llava/convert_image_encoder_to_gguf \
     -m path/to/clip-vit-large-patch14-336 \
     --llava-projector path/to/MobileVLM-1.7B/llava.projector \
     --output-dir path/to/MobileVLM-1.7B \
@@ -47,17 +47,17 @@ python ./examples/llava/convert-image-encoder-to-gguf \
 ```
 
 ```sh
-python ./examples/llava/convert-image-encoder-to-gguf \
+python ./examples/llava/convert_image_encoder_to_gguf \
     -m path/to/clip-vit-large-patch14-336 \
     --llava-projector path/to/MobileVLM-1.7B_V2/llava.projector \
     --output-dir path/to/MobileVLM-1.7B_V2 \
     --projector-type ldpv2
 ```
 
-4. Use `examples/convert-legacy-llama.py` to convert the LLaMA part of LLaVA to GGUF:
+4. Use `examples/convert_legacy_llama.py` to convert the LLaMA part of LLaVA to GGUF:
 
 ```sh
-python ./examples/convert-legacy-llama.py path/to/MobileVLM-1.7B
+python ./examples/convert_legacy_llama.py path/to/MobileVLM-1.7B
 ```
 
 5. Use `quantize` to convert LLaMA part's DataType from `fp16` to `q4_k`

examples/llava/README.md

@@ -38,22 +38,22 @@ git clone https://huggingface.co/openai/clip-vit-large-patch14-336
 pip install -r examples/llava/requirements.txt
 ```
 
-3. Use `llava-surgery.py` to split the LLaVA model to LLaMA and multimodel projector constituents:
+3. Use `llava_surgery.py` to split the LLaVA model to LLaMA and multimodel projector constituents:
 
 ```sh
-python ./examples/llava/llava-surgery.py -m ../llava-v1.5-7b
+python ./examples/llava/llava_surgery.py -m ../llava-v1.5-7b
 ```
 
-4. Use `convert-image-encoder-to-gguf.py` to convert the LLaVA image encoder to GGUF:
+4. Use `convert_image_encoder_to_gguf.py` to convert the LLaVA image encoder to GGUF:
 
 ```sh
-python ./examples/llava/convert-image-encoder-to-gguf.py -m ../clip-vit-large-patch14-336 --llava-projector ../llava-v1.5-7b/llava.projector --output-dir ../llava-v1.5-7b
+python ./examples/llava/convert_image_encoder_to_gguf.py -m ../clip-vit-large-patch14-336 --llava-projector ../llava-v1.5-7b/llava.projector --output-dir ../llava-v1.5-7b
 ```
 
-5. Use `examples/convert-legacy-llama.py` to convert the LLaMA part of LLaVA to GGUF:
+5. Use `examples/convert_legacy_llama.py` to convert the LLaMA part of LLaVA to GGUF:
 
 ```sh
-python ./examples/convert-legacy-llama.py ../llava-v1.5-7b --skip-unknown
+python ./examples/convert_legacy_llama.py ../llava-v1.5-7b --skip-unknown
 ```
 
 Now both the LLaMA part and the image encoder are in the `llava-v1.5-7b` directory.
@@ -70,9 +70,9 @@ git clone https://huggingface.co/liuhaotian/llava-v1.6-vicuna-7b
 pip install -r examples/llava/requirements.txt
 ```
 
-3) Use `llava-surgery-v2.py` which also supports llava-1.5 variants pytorch as well as safetensor models:
+3) Use `llava_surgery_v2.py` which also supports llava-1.5 variants pytorch as well as safetensor models:
 ```console
-python examples/llava/llava-surgery-v2.py -C -m ../llava-v1.6-vicuna-7b/
+python examples/llava/llava_surgery_v2.py -C -m ../llava-v1.6-vicuna-7b/
 ```
 - you will find a llava.projector and a llava.clip file in your model directory
 
@@ -86,13 +86,13 @@ curl -s -q https://huggingface.co/cmp-nct/llava-1.6-gguf/raw/main/config_vit.jso
 
 5) Create the visual gguf model:
 ```console
-python ./examples/llava/convert-image-encoder-to-gguf.py -m vit --llava-projector vit/llava.projector --output-dir vit --clip-model-is-vision
+python ./examples/llava/convert_image_encoder_to_gguf.py -m vit --llava-projector vit/llava.projector --output-dir vit --clip-model-is-vision
 ```
 - This is similar to llava-1.5, the difference is that we tell the encoder that we are working with the pure vision model part of CLIP
 
 6) Then convert the model to gguf format:
 ```console
-python ./examples/convert-legacy-llama.py ../llava-v1.6-vicuna-7b/ --skip-unknown
+python ./examples/convert_legacy_llama.py ../llava-v1.6-vicuna-7b/ --skip-unknown
 ```
 
 7) And finally we can run the llava cli using the 1.6 model version:

examples/llava/requirements.txt

@@ -1,3 +1,3 @@
--r ../../requirements/requirements-convert-legacy-llama.txt
+-r ../../requirements/requirements-convert_legacy_llama.txt
 pillow~=10.2.0
 torch~=2.2.1

gguf-py/README.md

@@ -3,7 +3,7 @@
 This is a Python package for writing binary files in the [GGUF](https://github.com/ggerganov/ggml/pull/302)
 (GGML Universal File) format.
 
-See [convert-llama-hf-to-gguf.py](https://github.com/ggerganov/llama.cpp/blob/master/convert-hf-to-gguf.py)
+See [convert_hf_to_gguf.py](https://github.com/ggerganov/llama.cpp/blob/master/convert_hf_to_gguf.py)
 as an example for its usage.
 
 ## Installation
@@ -15,13 +15,13 @@ pip install gguf
 
 [examples/writer.py](https://github.com/ggerganov/llama.cpp/blob/master/gguf-py/examples/writer.py) — Generates `example.gguf` in the current directory to demonstrate generating a GGUF file. Note that this file cannot be used as a model.
 
-[scripts/gguf-dump.py](https://github.com/ggerganov/llama.cpp/blob/master/gguf-py/scripts/gguf-dump.py) — Dumps a GGUF file's metadata to the console.
+[scripts/gguf_dump.py](https://github.com/ggerganov/llama.cpp/blob/master/gguf-py/scripts/gguf_dump.py) — Dumps a GGUF file's metadata to the console.
 
-[scripts/gguf-set-metadata.py](https://github.com/ggerganov/llama.cpp/blob/master/gguf-py/scripts/gguf-set-metadata.py) — Allows changing simple metadata values in a GGUF file by key.
+[scripts/gguf_set_metadata.py](https://github.com/ggerganov/llama.cpp/blob/master/gguf-py/scripts/gguf_set_metadata.py) — Allows changing simple metadata values in a GGUF file by key.
 
-[scripts/gguf-convert-endian.py](https://github.com/ggerganov/llama.cpp/blob/master/gguf-py/scripts/gguf-convert-endian.py) — Allows converting the endianness of GGUF files.
+[scripts/gguf_convert_endian.py](https://github.com/ggerganov/llama.cpp/blob/master/gguf-py/scripts/gguf_convert_endian.py) — Allows converting the endianness of GGUF files.
 
-[scripts/gguf-new-metadata.py](https://github.com/ggerganov/llama.cpp/blob/master/gguf-py/scripts/gguf-new-metadata.py) — Copies a GGUF file with added/modified/removed metadata values.
+[scripts/gguf_new_metadata.py](https://github.com/ggerganov/llama.cpp/blob/master/gguf-py/scripts/gguf_new_metadata.py) — Copies a GGUF file with added/modified/removed metadata values.
 
 ## Development
 Maintainers who participate in development of this package are advised to install it in editable mode:

gguf-py/scripts/__init__.py

@@ -1,13 +1,4 @@
-import os
-
-from importlib import import_module
-
-
-os.environ["NO_LOCAL_GGUF"] = "TRUE"
-
-gguf_convert_endian_entrypoint = import_module("scripts.gguf-convert-endian").main
-gguf_dump_entrypoint           = import_module("scripts.gguf-dump").main
-gguf_set_metadata_entrypoint   = import_module("scripts.gguf-set-metadata").main
-gguf_new_metadata_entrypoint   = import_module("scripts.gguf-new-metadata").main
-
-del import_module, os
+from .gguf_convert_endian import main as gguf_convert_endian_entrypoint
+from .gguf_dump import main as gguf_dump_entrypoint
+from .gguf_set_metadata import main as gguf_set_metadata_entrypoint
+from .gguf_new_metadata import main as gguf_new_metadata_entrypoint

requirements.txt

@@ -4,7 +4,7 @@
 # Package versions must stay compatible across all top-level python scripts.
 #
 
--r ./requirements/requirements-convert-legacy-llama.txt
+-r ./requirements/requirements-convert_legacy_llama.txt
 
 -r ./requirements/requirements-convert_hf_to_gguf.txt
 -r ./requirements/requirements-convert_hf_to_gguf_update.txt

requirements/requirements-convert_hf_to_gguf.txt

@@ -1,2 +1,2 @@
--r ./requirements-convert-legacy-llama.txt
+-r ./requirements-convert_legacy_llama.txt
 torch~=2.2.1

requirements/requirements-convert_hf_to_gguf_update.txt

@@ -1,2 +1,2 @@
--r ./requirements-convert-legacy-llama.txt
+-r ./requirements-convert_legacy_llama.txt
 torch~=2.2.1

requirements/requirements-convert_llama_ggml_to_gguf.txt

@@ -1 +1 @@
--r ./requirements-convert-legacy-llama.txt
+-r ./requirements-convert_legacy_llama.txt

scripts/check-requirements.sh

@@ -97,9 +97,9 @@ check_requirements() {
 }
 
 check_convert_script() {
-    local py=$1             # e.g. ./convert-hf-to-gguf.py
-    local pyname=${py##*/}  # e.g. convert-hf-to-gguf.py
-    pyname=${pyname%.py}    # e.g. convert-hf-to-gguf
+    local py=$1             # e.g. ./convert_hf_to_gguf.py
+    local pyname=${py##*/}  # e.g. convert_hf_to_gguf.py
+    pyname=${pyname%.py}    # e.g. convert_hf_to_gguf
 
     info "$py: beginning check"
 
@@ -166,9 +166,9 @@ if (( do_cleanup )); then
     rm -rf -- "$all_venv"
 fi
 
-check_convert_script examples/convert-legacy-llama.py
+check_convert_script examples/convert_legacy_llama.py
 for py in convert_*.py; do
-    # skip convert-hf-to-gguf-update.py
+    # skip convert_hf_to_gguf_update.py
     # TODO: the check is failing for some reason:
     #       https://github.com/ggerganov/llama.cpp/actions/runs/8875330981/job/24364557177?pr=6920
     [[ $py == convert_hf_to_gguf_update.py ]] && continue

scripts/convert-gg.sh

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-set -e
-
-# LLaMA v1
-python3 examples/convert-legacy-llama.py ../llama1/7B  --outfile models/llama-7b/ggml-model-f16.gguf  --outtype f16
-python3 examples/convert-legacy-llama.py ../llama1/13B --outfile models/llama-13b/ggml-model-f16.gguf --outtype f16
-python3 examples/convert-legacy-llama.py ../llama1/30B --outfile models/llama-30b/ggml-model-f16.gguf --outtype f16
-python3 examples/convert-legacy-llama.py ../llama1/65B --outfile models/llama-65b/ggml-model-f16.gguf --outtype f16
-
-# LLaMA v2
-python3 examples/convert-legacy-llama.py ../llama2/llama-2-7b  --outfile models/llama-7b-v2/ggml-model-f16.gguf  --outtype f16
-python3 examples/convert-legacy-llama.py ../llama2/llama-2-13b --outfile models/llama-13b-v2/ggml-model-f16.gguf --outtype f16
-python3 examples/convert-legacy-llama.py ../llama2/llama-2-70b --outfile models/llama-70b-v2/ggml-model-f16.gguf --outtype f16
-
-# Code Llama
-python3 examples/convert-legacy-llama.py ../codellama/CodeLlama-7b/  --outfile models/codellama-7b/ggml-model-f16.gguf  --outtype f16
-python3 examples/convert-legacy-llama.py ../codellama/CodeLlama-13b/ --outfile models/codellama-13b/ggml-model-f16.gguf --outtype f16
-python3 examples/convert-legacy-llama.py ../codellama/CodeLlama-34b/ --outfile models/codellama-34b/ggml-model-f16.gguf --outtype f16
-
-# Falcon
-python3 convert-falcon-hf-to-gguf.py ../falcon/falcon-7b  1
-mv -v ../falcon/falcon-7b/ggml-model-f16.gguf models/falcon-7b/ggml-model-f16.gguf
-
-python3 convert-falcon-hf-to-gguf.py ../falcon/falcon-40b 1
-mv -v ../falcon/falcon-40b/ggml-model-f16.gguf models/falcon-40b/ggml-model-f16.gguf

scripts/pod-llama.sh

@@ -75,7 +75,7 @@ if [ "$1" -eq "1" ]; then
 
     cd /workspace/llama.cpp
 
-    python3 examples/convert-legacy-llama.py ./models/tinyllama-1b  --outfile ./models/tinyllama-1b/ggml-model-f16.gguf  --outtype f16
+    python3 examples/convert_legacy_llama.py ./models/tinyllama-1b  --outfile ./models/tinyllama-1b/ggml-model-f16.gguf  --outtype f16
 
     ./llama-quantize ./models/tinyllama-1b/ggml-model-f16.gguf ./models/tinyllama-1b/ggml-model-q4_0.gguf q4_0
     ./llama-quantize ./models/tinyllama-1b/ggml-model-f16.gguf ./models/tinyllama-1b/ggml-model-q4_k.gguf q4_k
@@ -90,7 +90,7 @@ if [ "$1" -eq "2" ]; then
 
     cd /workspace/llama.cpp
 
-    python3 examples/convert-legacy-llama.py ./models/codellama-7b  --outfile ./models/codellama-7b/ggml-model-f16.gguf  --outtype f16
+    python3 examples/convert_legacy_llama.py ./models/codellama-7b  --outfile ./models/codellama-7b/ggml-model-f16.gguf  --outtype f16
 
     ./llama-quantize ./models/codellama-7b/ggml-model-f16.gguf ./models/codellama-7b/ggml-model-q4_0.gguf q4_0
     ./llama-quantize ./models/codellama-7b/ggml-model-f16.gguf ./models/codellama-7b/ggml-model-q4_k.gguf q4_k
@@ -105,7 +105,7 @@ if [ "$1" -eq "3" ]; then
 
     cd /workspace/llama.cpp
 
-    python3 examples/convert-legacy-llama.py ./models/codellama-13b --outfile ./models/codellama-13b/ggml-model-f16.gguf --outtype f16
+    python3 examples/convert_legacy_llama.py ./models/codellama-13b --outfile ./models/codellama-13b/ggml-model-f16.gguf --outtype f16
 
     ./llama-quantize ./models/codellama-13b/ggml-model-f16.gguf ./models/codellama-13b/ggml-model-q4_0.gguf q4_0
     ./llama-quantize ./models/codellama-13b/ggml-model-f16.gguf ./models/codellama-13b/ggml-model-q4_k.gguf q4_k
@@ -120,7 +120,7 @@ if [ "$1" -eq "4" ]; then
 
     cd /workspace/llama.cpp
 
-    python3 examples/convert-legacy-llama.py ./models/codellama-34b --outfile ./models/codellama-34b/ggml-model-f16.gguf --outtype f16
+    python3 examples/convert_legacy_llama.py ./models/codellama-34b --outfile ./models/codellama-34b/ggml-model-f16.gguf --outtype f16
 
     ./llama-quantize ./models/codellama-34b/ggml-model-f16.gguf ./models/codellama-34b/ggml-model-q4_0.gguf q4_0
     ./llama-quantize ./models/codellama-34b/ggml-model-f16.gguf ./models/codellama-34b/ggml-model-q4_k.gguf q4_k
@@ -135,7 +135,7 @@ if [ "$1" -eq "5" ]; then
 
     cd /workspace/llama.cpp
 
-    python3 examples/convert-legacy-llama.py ./models/codellama-7b-instruct  --outfile ./models/codellama-7b-instruct/ggml-model-f16.gguf  --outtype f16
+    python3 examples/convert_legacy_llama.py ./models/codellama-7b-instruct  --outfile ./models/codellama-7b-instruct/ggml-model-f16.gguf  --outtype f16
 
     ./llama-quantize ./models/codellama-7b-instruct/ggml-model-f16.gguf ./models/codellama-7b-instruct/ggml-model-q4_0.gguf q4_0
     ./llama-quantize ./models/codellama-7b-instruct/ggml-model-f16.gguf ./models/codellama-7b-instruct/ggml-model-q4_k.gguf q4_k
@@ -150,7 +150,7 @@ if [ "$1" -eq "6" ]; then
 
     cd /workspace/llama.cpp
 
-    python3 examples/convert-legacy-llama.py ./models/codellama-13b-instruct --outfile ./models/codellama-13b-instruct/ggml-model-f16.gguf --outtype f16
+    python3 examples/convert_legacy_llama.py ./models/codellama-13b-instruct --outfile ./models/codellama-13b-instruct/ggml-model-f16.gguf --outtype f16
 
     ./llama-quantize ./models/codellama-13b-instruct/ggml-model-f16.gguf ./models/codellama-13b-instruct/ggml-model-q4_0.gguf q4_0
     ./llama-quantize ./models/codellama-13b-instruct/ggml-model-f16.gguf ./models/codellama-13b-instruct/ggml-model-q4_k.gguf q4_k
@@ -165,7 +165,7 @@ if [ "$1" -eq "7" ]; then
 
     cd /workspace/llama.cpp
 
-    python3 examples/convert-legacy-llama.py ./models/codellama-34b-instruct --outfile ./models/codellama-34b-instruct/ggml-model-f16.gguf --outtype f16
+    python3 examples/convert_legacy_llama.py ./models/codellama-34b-instruct --outfile ./models/codellama-34b-instruct/ggml-model-f16.gguf --outtype f16
 
     ./llama-quantize ./models/codellama-34b-instruct/ggml-model-f16.gguf ./models/codellama-34b-instruct/ggml-model-q4_0.gguf q4_0
     ./llama-quantize ./models/codellama-34b-instruct/ggml-model-f16.gguf ./models/codellama-34b-instruct/ggml-model-q4_k.gguf q4_k