* Rebase to latest
* Show progress
* Add assert to make sure we only allocate temp buffer for non-CPU backend tensor
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
---------
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
The number of buffers in the ggml context was left unitialized.
This leads to sporadic failures to load the model on
startup. It is actually strange that the failure occurred so
infrequantly.
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Fix issue where interactive mode in the main example crashes when input exceeds ctx size
* Ensure the context size is at least 8 tokens in the main example.
Closes#1768
This is needed to make operators like ggml_view() be able to store their
parameters in the ggml context's memory and not get discarded when
no_alloc is true
* Add support for quantizing already quantized models
* Threaded dequantizing and f16 to f32 conversion
* Clean up thread blocks with spares calculation a bit
* Use std::runtime_error exceptions.
* metal : 8% faster q4_0
Avoid copying into local uchar4 anf float4.
* metal : 17% faster Q4_0
Use 64 threads in a thread group.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* metal : add Q2_K implementation
27.1 ms / token on M2 Max 30-core GPU, so about the
same speed as Q4_0. Memory throughput is ~156 GB/s.
The access pattern used in the Q2_K
CUDA implementation resulted in significantly lower
performance (~31 ms/token).
* Fixing merge conflicts
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Metal implementation for Q4_K
Very slow for now:
42 ms / token, Q4_0 runs in 28 ms/token on my
30-core M2 Max GPU.
* Optimizing Q4_K on metal
The first token always takes longer, I guess because
the metal kernel is being jit-compiled.
So, using n = 128 to measure time.
At this point Q4_K takes 29.5 ms / token
compared to 27.2 ms / token for Q4_0.
Quite a bit better than the initial attempt,
but still not good enough.
* Optimizing q4_K metal dot some more
For n = 256 it is now 28.1 ms/token compared to
27 ms/token for q4_0.
* Fix after merge with master
* Metal implementation for Q6_K
Similar to the CUDA implementation.
No idea if this is the optimum for Metal, but the few
alternative variants I tried all had a lower performance.
We get 36.5 ms / token on M2 Max with 30 GPU cores.
This corresponds to ~200 GB/second throughput.
* clang-tidy : add config back
* Much better Q6_K implementation for metal
28.3 ms / token for 7B. Subtracting ~9 ms that is spent in
other compute graph operations, we are left with ~19 ms
for the matrix multiplications. The model is ~5.5 GB,
so we are getting 1000 / 19 * 5.5 = 290 GB/s!
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Metal implementation for Q4_K
Very slow for now:
42 ms / token, Q4_0 runs in 28 ms/token on my
30-core M2 Max GPU.
* Optimizing Q4_K on metal
The first token always takes longer, I guess because
the metal kernel is being jit-compiled.
So, using n = 128 to measure time.
At this point Q4_K takes 29.5 ms / token
compared to 27.2 ms / token for Q4_0.
Quite a bit better than the initial attempt,
but still not good enough.
* Optimizing q4_K metal dot some more
For n = 256 it is now 28.1 ms/token compared to
27 ms/token for q4_0.
* Fix after merge with master
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
The prompt cache constitutes a nice speed up when using the same prompt
prefix across multiple evaluations, but when using it, it will also be
updated, which is not always desirable. One use case is to have a large
prompt containing some context and usage rules, and a second part
containing variable data of the problem being studied. In this case it's
desirable to be able to save the first part once, and to always reuse it
as-is without updating it with the second part.
The new argument --prompt-cache-ro enables this read-only mode on the
prompt cache. The prompt's contents that match the cache are loaded
from the cache but the rest is not modified. This allowed to reduce a
total analysis time from 112s to 49.7s here, without having to backup
and restore a copy of the prompt, which takes significant time at 500
MB.
Signed-off-by: Willy Tarreau <w@1wt.eu>
* Use events instead of clFinish, where possible
* OpenCL: Don't load gpu layers into RAM, add mul_f32 kernel
* Reduce queueing overhead for contiguous tensors by using single mul kernel call
* Adapt to #1612 cl_mem malloc changes
* Reduce code duplication between cuda and opencl branches
* Improve implementation
* Clblast fixes + enhancements to save VRAM:
1. Change all Clblast buffers to CL_MEM_READ_WRITE, as the pool malloc currently doesn't properly handle them.
2. When recycling buffers in pool malloc, always assign the SMALLEST available buffer that fits, instead of the FIRST available buffer
3. When failing to recycle a buffer in pool malloc (all too small), instead recycle the largest available free buffer by resizing it.
* change max value size_t to use limits
* removed flags from the CL pool malloc, apply code tidying suggestions.
* Use MTLDevice.newBufferWithBytesNoCopy to share buffers between CPU and GPU
* Page-align buffers used by Metal
* Remove trailing whitespace
* Only import unistd.h for Metal builds
* metal : remove unnecessary copies
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Starting to add k-quantization to ggml
I think it is better to have quantization separate from
ggml. For now just adding the k-quants there, but it would be
better to also factor out the existing ggml quantizations.
* Adding Q3_K and Q8_K (de)-quantization
* Q3_K now working on CUDA and AVX2/scalar
CUDA is not ideal - ~50% slower than Q4_0 for
single token prediction, about the same in batch
mode (perplexity). CPU single token is ~55 ms
(on Ryzen 7950X).
* Some improvement for Q3_K on CUDA
It is now ~22.5 ms/token on my GPU, so ~30% slower than Q4_0.
* Some more CUDA optimizations for Q3_K
Single token is now 20.5 ms/token (~20% slower than Q4_0).
Perplexity is on par with Q4_0.
* Adding Q4_K - scalar, AVX2, CUDA
Performance is the same or perhaps very slightly better than Q4_0 on the CPU.
On the GPU, single token prediction is ~10% better than Q4_0,
batch mode (perplexity is about the same).
* Adding Q6_K - scalar, AVX2, CUDA
Performance is ~40% lower compared to Q4_K on the CPU.
This is to be expected, considering that we are memory bound
on the CPU and the 6-bit model is ~44% larger than the 4-bit.
On the GPU, single token prediction is ~6% lower than Q4_0,
batch mode (perplexity) is even closer (but still slower).
* Adding Q5_K - scalar, AVX2, CUDA
Performance is ~20% lower compared to Q4_K on the CPU.
This is to be expected, considering that we are memory bound
on the CPU and the 5-bit model is ~22% larger than the 4-bit.
On the GPU, single token prediction is about the same as Q4_0
for both, single token and batch prediction.
* Per convention, all QX_K quantizations use Q5_K for output.weight
* Adding quantization mixes
* Quantization mixes: didn't quite get what I wanted in the last commit
* Q4_K dot product for ARM_NEON
* Q6_K dot product for ARM_NEON
* Q5_K dot product for ARM_NEON
* Adding Q3_K dot for ARM_NEON
It is 22% slower than Q4_K, despite the smaller model size.
On x86_64, where we are memory bound, the Q3_K model is
quite a bit faster than Q4_K.
* A very slightly faster ARM_NEON Q3_K dot
* Adding Q2_K - just CUDA for now
Token prediction is pretty good - about 15.5 ms on a RTX 4080.
Perplexity is about the same as Q4_K.
* Adding scalar and AVX2 Q2_K dot
* Adding ARM_NEON Q2_K dot
About the same performance as Q4_K.
* A slightly faster ARM_NEON Q2_K dot
Single token prediction is now ~36 ms on M2 Max.
The code is much simpler too.
* Fixed bug in Q2_K CUDA dot product kernel
Stranegly enough, for the few prompts I tried with the 7B model
the responses looked perfectly reasonable. Only realized something
is not quite right when I tried the larger models and started getting
nonse back.
In any case, Q2_K single token evaluation time on an RTX 4080 in a Ryzen7950X
box iusing CUDA and model fully loaded on the GPU are
~15.5 ms for 7B, ~25.4 ms for 13B, and ~55.8 ms for 30B.
The max number of layers that fit in VRAM for The 65B is 32.
With that, we get ~330 ms per token, which is not that much faster
than just running on the CPU (~470 ms per token).
* Don't print zeros/NaNs when no count histogram has been collected
* A 10% faster CUDA vector dot kernel for Q3_K
Q3_K is now running at ~18.5 ms / token on CUDA,
so the gap to Q4_0 is only 10%.
It seems memory acccess pattern is more important for
performance than the amount of computation the kernel
does.
* A slightly daster Q4_K AVX2 dot product
For perplexity, where we are less memory bound, time per
pass drops by ~5%. Barely measurable difference for single
token prediction.
* A slightly faster ARM_NEON A4_K dot product
* Minor
* Fix quantization error test
We cannot possibly be expecting rmse < 0.002 for 2- and 3-bit
quantization variants.
* Fix docker build
I have been sloppy with vector reinterpret casts on ARM_NEON.
It seems clang is very forgiving in that regard.
* Added forgotten ggml.o dependence on k_quants.h to the Makefile
* Had unintentionally committed the Makefile with -Ofast enabled
* ggml : rename k_quants -> ggml-quants-k, use lowercase in code
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
