Some refactoring

This commit is contained in:
exu 2023-11-22 13:11:50 +01:00
parent 0cf14254e7
commit 7cf2e82f3a

View File

@ -30,9 +30,11 @@ set $term kitty
# Your preferred application launcher
# Note: pass the final command to swaymsg so that the resulting window can be opened
# on the original workspace that the command was run on.
#set $menu dmenu_path | dmenu | xargs swaymsg exec --
set $menu wofi --show drun | xargs swaymsg exec --
##############################
########### Input ############
##############################
### Keyboard, Mouse and others configuration
# Keyboard config https://man.archlinux.org/man/xkeyboard-config.7
# Sway input https://man.archlinux.org/man/sway-input.5
@ -48,7 +50,9 @@ set $menu wofi --show drun | xargs swaymsg exec --
# }
#
# You can get the names of your inputs by running: swaymsg -t get_inputs
# Read `man 5 sway-input` for more information about this section.#
# Read `man 5 sway-input` for more information about this section.
# generic/general options
input * {
# Keyboard
xkb_layout "ch"
@ -65,27 +69,22 @@ input * {
# slightly decrease mouse speed
input "1133:16500:Logitech_G305" pointer_accel -0.3
### Output configuration
##############################
########## Outputs ###########
##############################
# You can get the names of your outputs by running: swaymsg -t get_outputs
output "Acer Technologies XV272U V R307036FE4208" mode 2560x1440@170Hz
output "Acer Technologies XV272U V R307036FE4208" scale 1.2
output "Acer Technologies XV272U V R307036FE4208" subpixel rgb
output "Acer Technologies XV272U V R307036FE4208" adaptive_sync on
### Idle configuration
#
# Example configuration:
#
# exec swayidle -w \
# timeout 300 'swaylock -f -c 000000' \
# timeout 600 'swaymsg "output * power off"' resume 'swaymsg "output * power on"' \
# before-sleep 'swaylock -f -c 000000'
#
##############################
############ Idle ############
##############################
# This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 300 seconds, and turn your screens back on when
# resumed. It will also lock your screen before your computer goes to sleep.
# -c 000000 sets the color in RGB
# -c 000000 sets the color in RGB (no alpha supported)
# use -i to set an image
exec swayidle -w \
timeout 300 'swaylock -f -e -i "$HOME/.cache/backgrounds/lockscreen"' \
@ -96,117 +95,119 @@ exec swayidle -w \
#
# Basics:
#
# Start a terminal
#bindsym $mod+Return exec $term
bindsym ctrl+mod1+Return exec $term
# Start a terminal
bindsym ctrl+mod1+Return exec $term
# Kill focused window
bindsym $mod+q kill
# Kill focused window
bindsym $mod+q kill
# Start your launcher
bindsym ctrl+mod1+a exec $menu
# Start your launcher
bindsym ctrl+mod1+a exec $menu
# Drag floating windows by holding down $mod and left mouse button.
# Resize them with right mouse button + $mod.
# Despite the name, also works for non-floating windows.
# Change normal to inverse to use left mouse button for resizing and right
# mouse button for dragging.
floating_modifier $mod normal
# Drag floating windows by holding down $mod and left mouse button.
# Resize them with right mouse button + $mod.
# Despite the name, also works for non-floating windows.
# Change normal to inverse to use left mouse button for resizing and right
# mouse button for dragging.
floating_modifier $mod normal
# Reload the configuration file
bindsym $mod+Shift+r reload
# Reload the configuration file
bindsym $mod+Shift+r reload
# Exit sway (logs you out of your Wayland session)
#bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
# Exit sway (logs you out of your Wayland session)
#bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
#
# Moving around:
#
# Move your focus around
bindsym $mod+$left focus left
bindsym $mod+$down focus down
bindsym $mod+$up focus up
bindsym $mod+$right focus right
# Or use $mod+[up|down|left|right]
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# Move your focus around
bindsym $mod+$left focus left
bindsym $mod+$down focus down
bindsym $mod+$up focus up
bindsym $mod+$right focus right
# Move the focused window with the same, but add Shift
bindsym $mod+Shift+$left move left
bindsym $mod+Shift+$down move down
bindsym $mod+Shift+$up move up
bindsym $mod+Shift+$right move right
# Ditto, with arrow keys
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# Or use $mod+[up|down|left|right]
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# Move the focused window with the same, but add Shift
bindsym $mod+Shift+$left move left
bindsym $mod+Shift+$down move down
bindsym $mod+Shift+$up move up
bindsym $mod+Shift+$right move right
# Ditto, with arrow keys
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
#
# Workspaces:
#
# Switch to workspace
bindsym $mod+1 workspace number 1
bindsym $mod+2 workspace number 2
bindsym $mod+3 workspace number 3
bindsym $mod+4 workspace number 4
bindsym $mod+5 workspace number 5
bindsym $mod+6 workspace number 6
bindsym $mod+7 workspace number 7
bindsym $mod+8 workspace number 8
bindsym $mod+9 workspace number 9
bindsym $mod+0 workspace number 10
# Move focused container to workspace
bindsym $mod+Shift+1 move container to workspace number 1; workspace 1
bindsym $mod+Shift+2 move container to workspace number 2; workspace 2
bindsym $mod+Shift+3 move container to workspace number 3; workspace 3
bindsym $mod+Shift+4 move container to workspace number 4; workspace 4
bindsym $mod+Shift+5 move container to workspace number 5; workspace 5
bindsym $mod+Shift+6 move container to workspace number 6; workspace 6
bindsym $mod+Shift+7 move container to workspace number 7; workspace 7
bindsym $mod+Shift+8 move container to workspace number 8; workspace 8
bindsym $mod+Shift+9 move container to workspace number 9; workspace 9
bindsym $mod+Shift+0 move container to workspace number 10; workspace 10
# Note: workspaces can have any name you want, not just numbers.
# We just use 1-10 as the default.
# Switch to workspace
bindsym $mod+1 workspace number 1
bindsym $mod+2 workspace number 2
bindsym $mod+3 workspace number 3
bindsym $mod+4 workspace number 4
bindsym $mod+5 workspace number 5
bindsym $mod+6 workspace number 6
bindsym $mod+7 workspace number 7
bindsym $mod+8 workspace number 8
bindsym $mod+9 workspace number 9
bindsym $mod+0 workspace number 10
# Move focused container to workspace
bindsym $mod+Shift+1 move container to workspace number 1; workspace 1
bindsym $mod+Shift+2 move container to workspace number 2; workspace 2
bindsym $mod+Shift+3 move container to workspace number 3; workspace 3
bindsym $mod+Shift+4 move container to workspace number 4; workspace 4
bindsym $mod+Shift+5 move container to workspace number 5; workspace 5
bindsym $mod+Shift+6 move container to workspace number 6; workspace 6
bindsym $mod+Shift+7 move container to workspace number 7; workspace 7
bindsym $mod+Shift+8 move container to workspace number 8; workspace 8
bindsym $mod+Shift+9 move container to workspace number 9; workspace 9
bindsym $mod+Shift+0 move container to workspace number 10; workspace 10
# Note: workspaces can have any name you want, not just numbers.
# We just use 1-10 as the default.
#
# Layout stuff:
#
# You can "split" the current object of your focus with
# $mod+b or $mod+v, for horizontal and vertical splits
# respectively.
bindsym $mod+o splith
bindsym $mod+v splitv
# You can "split" the current object of your focus with
# $mod+b or $mod+v, for horizontal and vertical splits
# respectively.
bindsym $mod+o splith
bindsym $mod+v splitv
# Switch the current container between different layout styles
bindsym $mod+s layout stacking
bindsym $mod+z layout tabbed
bindsym $mod+e layout toggle split
# Switch the current container between different layout styles
bindsym $mod+s layout stacking
bindsym $mod+z layout tabbed
bindsym $mod+e layout toggle split
# Make the current focus fullscreen
bindsym $mod+f fullscreen
# Make the current focus fullscreen
bindsym $mod+f fullscreen
# Toggle the current focus between tiling and floating mode
bindsym $mod+Shift+f floating toggle
# Toggle the current focus between tiling and floating mode
bindsym $mod+Shift+f floating toggle
# Swap focus between the tiling area and the floating area
# TODO haven't ever used this afaik
bindsym $mod+space focus mode_toggle
# Swap focus between the tiling area and the floating area
# TODO haven't ever used this afaik
bindsym $mod+space focus mode_toggle
# Move focus to the parent container
bindsym $mod+a focus parent
# Move focus to the parent container
bindsym $mod+a focus parent
#
# Scratchpad:
#
# Sway has a "scratchpad", which is a bag of holding for windows.
# You can send windows there and get them back later.
# Sway has a "scratchpad", which is a bag of holding for windows.
# You can send windows there and get them back later.
# Move the currently focused window to the scratchpad
#bindsym $mod+Shift+minus move scratchpad
# Move the currently focused window to the scratchpad
#bindsym $mod+Shift+minus move scratchpad
# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
#bindsym $mod+minus scratchpad show
# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
#bindsym $mod+minus scratchpad show
#
# Resizing containers:
#