Use pipewire and built-in progress bar for dunst

arch-config/.config/dunst/dunstrc

@@ -17,40 +17,74 @@
     # will be ignored.
     follow = mouse
 
-    # The geometry of the window:
+    ### Geometry ###
-    #   [{width}]x{height}[+/-{x}+/-{y}]
-    # The geometry of the message window.
-    # The height is measured in number of notifications everything else
-    # in pixels.  If the width is omitted but the height is given
-    # ("-geometry x2"), the message window expands over the whole screen
-    # (dmenu-like).  If width is 0, the window expands to the longest
-    # message displayed.  A positive x is measured from the left, a
-    # negative from the right side of the screen.  Y is measured from
-    # the top and down respectively.
-    # The width can be negative.  In this case the actual width is the
-    # screen width minus the width defined in within the geometry option.
-    geometry = "500x0-30+20"
 
-    # Show how many messages are currently hidden (because of geometry).
+    # dynamic width from 0 to 300
+    # width = (0, 300)
+    # constant width of 300
+    width = 500
+
+    # The maximum height of a single notification, excluding the frame.
+    height = 100
+
+    # Position the notification in the top right corner
+    origin = bottom-right
+
+    # Offset from the origin
+    offset = 5x5
+
+    # Scale factor. It is auto-detected if value is 0.
+    scale = 0
+
+    # Maximum number of notification (0 means no limit)
+    notification_limit = 20
+
+    ### Progress bar ###
+
+    # Turn on the progress bar. It appears when a progress hint is passed with
+    # for example dunstify -h int:value:12
+    progress_bar = true
+
+    # Set the progress bar height. This includes the frame, so make sure
+    # it's at least twice as big as the frame width.
+    progress_bar_height = 10
+
+    # Set the frame width of the progress bar
+    progress_bar_frame_width = 1
+
+    # Set the minimum width for the progress bar
+    progress_bar_min_width = 150
+
+    # Set the maximum width for the progress bar
+    progress_bar_max_width = 300
+
+    # Corner radius for the progress bar. 0 disables rounded corners.
+    progress_bar_corner_radius = 0
+
+    # Define which corners to round when drawing the progress bar. If progress_bar_corner_radius
+    # is set to 0 this option will be ignored.
+    progress_bar_corners = all
+
+    # Corner radius for the icon image.
+    icon_corner_radius = 0
+
+    # Define which corners to round when drawing the icon image. If icon_corner_radius
+    # is set to 0 this option will be ignored.
+    icon_corners = all
+
+    # Show how many messages are currently hidden (because of
+    # notification_limit).
     indicate_hidden = yes
 
-    # Shrink window if it's smaller than the width.  Will be ignored if
-    # width is 0.
-    shrink = yes
-
     # The transparency of the window.  Range: [0; 100].
     # This option will only work if a compositing window manager is
-    # present (e.g. xcompmgr, compiz, etc.).
+    # present (e.g. xcompmgr, compiz, etc.). (X11 only)
     transparency = 0
 
-    # The height of the entire notification.  If the height is smaller
-    # than the font height and padding combined, it will be raised
-    # to the font height and padding.
-    notification_height = 0
-
     # Draw a line of "separator_height" pixel height between two
     # notifications.
     # Set to 0 to disable.
+    # If gap_size is greater than 0, this setting will be ignored.
     separator_height = 2
 
     # Padding between text and separator.
@@ -59,13 +93,22 @@
     # Horizontal padding.
     horizontal_padding = 8
 
+    # Padding between text and icon.
+    text_icon_padding = 0
+
     # Defines width in pixels of frame around the notification window.
     # Set to 0 to disable.
-    frame_width = 2
+    frame_width = 3
 
     # Defines color of the frame around the notification window.
     frame_color = "#aaaaaa"
 
+    # Size of gap to display between notifications - requires a compositor.
+    # If value is greater than 0, separator_height will be ignored and a border
+    # of size frame_width will be drawn around each notification instead.
+    # Click events on gaps do not currently propagate to applications below.
+    gap_size = 0
+
     # Define a color for the separator.
     # possible values are:
     #  * auto: dunst tries to find a color fitting to the background;
@@ -74,7 +117,12 @@
     #  * anything else will be interpreted as a X color.
     separator_color = auto
 
-    # Sort messages by urgency.
+    # Sort type.
+    # possible values are:
+    #  * id: sort by id
+    #  * urgency_ascending: sort by urgency (low then normal then critical)
+    #  * urgency_descending: sort by urgency (critical then normal then low)
+    #  * update: sort by update (most recent always at the top)
     sort = yes
 
     # Don't remove messages, if the user is idle (no mouse or keyboard input)
@@ -100,7 +148,7 @@
     #        <u>underline</u>
     #
     #        For a complete reference see
-    #        <https://developer.gnome.org/pango/stable/pango-Markup.html>.
+    #        <https://docs.gtk.org/Pango/pango_markup.html>.
     #
     # strip: This setting is provided for compatibility with some broken
     #        clients that send markup even though it's not enabled on the
@@ -130,7 +178,7 @@
 
     # Alignment of message text.
     # Possible values are "left", "center" and "right".
-    alignment = center
+    alignment = left
 
     # Vertical alignment of message text and icon.
     # Possible values are "top", "center" and "bottom".
@@ -141,11 +189,7 @@
     # Set to -1 to disable.
     show_age_threshold = 60
 
-    # Split notifications into multiple lines if they don't fit into
+    # Specify where to make an ellipsis in long lines.
-    # geometry.
-    word_wrap = yes
-
-    # When word_wrap is set to no, specify where to make an ellipsis in long lines.
     # Possible values are "start", "middle" and "end".
     ellipsize = middle
 
@@ -163,19 +207,28 @@
 
     ### Icons ###
 
-    # Align icons left/right/off
+    # Recursive icon lookup. You can set a single theme, instead of having to
+    # define all lookup paths.
+    enable_recursive_icon_lookup = true
+
+    # Set icon theme (only used for recursive icon lookup)
+    icon_theme = "Surfn"
+    # You can also set multiple icon themes, with the leftmost one being used first.
+    # icon_theme = "Adwaita, breeze"
+
+    # Align icons left/right/top/off
     icon_position = left
 
     # Scale small icons up to this size, set to 0 to disable. Helpful
     # for e.g. small files or high-dpi screens. In case of conflict,
     # max_icon_size takes precedence over this.
-    min_icon_size = 0
+    #min_icon_size = 32
 
     # Scale larger icons down to this size, set to 0 to disable
     max_icon_size = 32
 
-    # Paths to default icons.
+    # Paths to default icons (only necessary when not using recursive icon lookup)
-    icon_path =  /usr/share/icons/Surfn/24/status/:/usr/share/icons/Surfn/24/devices/
+    #icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/
 
     ### History ###
 
@@ -192,37 +245,30 @@
     dmenu = /usr/bin/dmenu -p dunst:
 
     # Browser for opening urls in context menu.
-    browser = /usr/bin/firefox -new-tab
+    browser = /usr/bin/xdg-open
 
     # Always run rule-defined scripts, even if the notification is suppressed
     always_run_script = true
 
-    # Define the title of the windows spawned by dunst
+    # Define the title of the windows spawned by dunst (X11 only)
-    title = Dunst
+    #title = Dunst
 
-    # Define the class of the windows spawned by dunst
+    # Define the class of the windows spawned by dunst (X11 only)
-    class = Dunst
+    #class = Dunst
-
-    # Print a notification on startup.
-    # This is mainly for error detection, since dbus (re-)starts dunst
-    # automatically after a crash.
-    startup_notification = false
-
-    # Manage dunst's desire for talking
-    # Can be one of the following values:
-    #  crit: Critical features. Dunst aborts
-    #  warn: Only non-fatal warnings
-    #  mesg: Important Messages
-    #  info: all unimportant stuff
-    # debug: all less than unimportant stuff
-    verbosity = mesg
 
     # Define the corner radius of the notification window
     # in pixel size. If the radius is 0, you have no rounded
     # corners.
     # The radius will be automatically lowered if it exceeds half of the
     # notification height to avoid clipping text and/or icons.
-    corner_radius = 10
+    corner_radius = 15
+
+    # Define which corners to round when drawing the window. If the corner radius
+    # is set to 0 this option will be ignored.
+    #
+    # Comma-separated list of the corners. The accepted corner values are bottom-right,
+    # bottom-left, top-right, top-left, top, bottom, left, right or all.
+    corners = all
 
     # Ignore the dbus closeNotification message.
     # Useful to enforce the timeout set by dunst configuration. Without this
@@ -230,6 +276,16 @@
     # user defined timeout.
     ignore_dbusclose = false
 
+    ### Wayland ###
+    # These settings are Wayland-specific. They have no effect when using X11
+
+    # Uncomment this if you want to let notifications appear under fullscreen
+    # applications (default: overlay)
+    layer = top
+
+    # Set this to true to use X11 output on Wayland.
+    #force_xwayland = false
+
     ### Legacy
 
     # Use the Xinerama extension instead of RandR for multi-monitor support.
@@ -240,54 +296,37 @@
     # By enabling this setting dunst will not be able to detect when a monitor
     # is connected or disconnected which might break follow mode if the screen
     # layout changes.
-    force_xinerama = false
+    #force_xinerama = false
 
     ### mouse
 
     # Defines list of actions for each mouse event
     # Possible values are:
     # * none: Don't do anything.
-    # * do_action: If the notification has exactly one action, or one is marked as default,
+    # * do_action: Invoke the action determined by the action_name rule. If there is no
-    #              invoke it. If there are multiple and no default, open the context menu.
+    #              such action, open the context menu.
+    # * open_url: If the notification has exactly one url, open it. If there are multiple
+    #             ones, open the context menu.
     # * close_current: Close current notification.
     # * close_all: Close all notifications.
+    # * context: Open context menu for the notification.
+    # * context_all: Open context menu for all notifications.
     # These values can be strung together for each mouse event, and
     # will be executed in sequence.
     mouse_left_click = close_current
     mouse_middle_click = close_all
-    mouse_right_click = do_action
+    mouse_right_click = do_action,open_url
 
 # Experimental features that may or may not work correctly. Do not expect them
 # to have a consistent behaviour across releases.
-[experimental]
+#[experimental]
     # Calculate the dpi to use on a per-monitor basis.
     # If this setting is enabled the Xft.dpi value will be ignored and instead
     # dunst will attempt to calculate an appropriate dpi value for each monitor
     # using the resolution and physical size. This might be useful in setups
     # where there are multiple screens with very different dpi values.
-    per_monitor_dpi = false
+    #per_monitor_dpi = false
 
-[shortcuts]
-
-    # Shortcuts are specified as [modifier+][modifier+]...key
-    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
-    # "mod3" and "mod4" (windows-key).
-    # Xev might be helpful to find names for keys.
-
-    # Close notification.
-    #close = ctrl+space
-
-    # Close all notifications.
-    #close_all = ctrl+shift+space
-
-    # Redisplay last message(s).
-    # On the US keyboard layout "grave" is normally above TAB and left
-    # of "1". Make sure this key actually exists on your keyboard layout,
-    # e.g. check output of 'xmodmap -pke'
-    #history = ctrl+grave
-
-    # Context menu.
-    #context = ctrl+shift+period
 
 [urgency_low]
     # IMPORTANT: colors have to be defined in quotation marks.
@@ -296,21 +335,23 @@
     foreground = "#aaaaaa"
     timeout = 5
     # Icon for notifications with low urgency, uncomment to enable
-    #icon = /path/to/icon
+    #default_icon = /path/to/icon
 
 [urgency_normal]
     background = "#333333"
     foreground = "#ffffff"
     timeout = 10
+    override_pause_level = 30
     # Icon for notifications with normal urgency, uncomment to enable
-    #icon = /path/to/icon
+    #default_icon = /path/to/icon
 
 [urgency_critical]
     background = "#555555"
     foreground = "#ffffff"
     timeout = 0
+    override_pause_level = 60
     # Icon for notifications with critical urgency, uncomment to enable
-    #icon = /path/to/icon
+    #default_icon = /path/to/icon
 
 # Every section that isn't one of the above is interpreted as a rules to
 # override settings for certain messages.
@@ -335,8 +376,18 @@
 #    new_icon
 #    set_stack_tag
 #    set_transient
+#    set_category
 #    timeout
 #    urgency
+#    icon_position
+#    skip_display
+#    history_ignore
+#    action_name
+#    word_wrap
+#    ellipsize
+#    alignment
+#    hide_text
+#    override_pause_level
 #
 # Shell-like globbing will get expanded.
 #
@@ -344,6 +395,10 @@
 # GLib based applications export their desktop-entry name. In comparison to the appname,
 # the desktop-entry won't get localized.
 #
+# You can also allow a notification to appear even when paused. Notification will appear whenever notification's override_pause_level >= dunst's paused level.
+# This can be used to set partial pause modes, where more urgent notifications get through, but less urgent stay paused. To do that, you can override the following in the rules:
+# override_pause_level = X
+
 # SCRIPTING
 # You can specify a script that gets run when the rule matches by
 # setting the "script" option.
@@ -351,8 +406,6 @@
 #   script appname summary body icon urgency
 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 #
-# NOTE: if you don't want a notification to be displayed, set the format
-# to "".
 # NOTE: It might be helpful to run dunst -print in a terminal in order
 # to find fitting options for rules.
 
@@ -380,9 +433,6 @@
 #    msg_urgency = critical
 #    fullscreen = show
 
-[fullscreen_show]
-    fullscreen = show
-
 #[espeak]
 #    summary = "*"
 #    script = dunst_espeak.sh
@@ -394,7 +444,7 @@
 #[ignore]
 #    # This notification will not be displayed
 #    summary = "foobar"
-#    format = ""
+#    skip_display = true
 
 #[history-ignore]
 #    # This notification will not be saved in history
@@ -429,6 +479,7 @@
 #[stack-volumes]
 #    appname = "some_volume_notifiers"
 #    set_stack_tag = "volume"
+#
 
 [dunstify]
     appname = "dunstify"
@@ -443,11 +494,13 @@
 [volume-script]
     appname = "volume-script"
     format = "<b>%s</b>\n%b"
-    timeout = 5
+    timeout = 1
     script = "$HOME/scripts/dunst/dunst-notification-sound.sh"
 
 [backlight-script]
     appname = "backlight-script"
     format = "<b>%s</b>\n%b"
-    timeout = 5
+    timeout = 1
     script = "$HOME/scripts/dunst/dunst-notification-sound.sh"
+
+# vim: ft=cfg

arch-config/scripts/dunst/dunst-volume.sh

@@ -16,34 +16,37 @@ is_mute() {
 }
 
 send_notification() {
-    volume=$(get_volume)
     # Make the bar with the special character ─ (it's not dash -)
     # https://en.wikipedia.org/wiki/Box-drawing_character
-    bar=$(seq -s "─" $(($volume / 5)) | sed 's/[0-9]//g')
+    #bar=$(seq -s "─" $(($volume / 5)) | sed 's/[0-9]//g')
     # Send the notification
-    dunstify -i audio-volume-high -r 2593 -a volume-script "$volume    $bar    "
+    #dunstify -i audio-volume-high -r 2593 -a volume-script "$volume    $bar    "
+    dunstify -i audio-volume-high -a volume-script -h int:value:$volume "Volume"
 }
 
+
+volume=$(get_volume)
+
 case $1 in
     up)
-        # Set the volume on (if it was muted)
-        amixer -D pulse set Master on >/dev/null
-        # Up the volume (+ 5%)
-        amixer -D pulse sset Master 5%+ >/dev/null
         send_notification
+        # Set the volume on (if it was muted)
+        amixer -D pipewire set Master on >/dev/null
+        # Up the volume (+ 5%)
+        amixer -D pipewire sset Master 5%+ >/dev/null
         ;;
     down)
-        amixer -D pulse set Master on >/dev/null
-        amixer -D pulse sset Master 5%- >/dev/null
         send_notification
+        amixer -D pipewire set Master on >/dev/null
+        amixer -D pipewire sset Master 5%- >/dev/null
         ;;
     mute)
-        # Toggle mute
-        amixer -D pulse set Master 1+ toggle >/dev/null
         if is_mute; then
-            dunstify -i audio-volume-muted -r 2593 -u normal "Mute"
+            dunstify -i audio-volume-muted -a volume-script -h int:value:$volume "Mute"
         else
             send_notification
         fi
+        # Toggle mute
+        amixer -D pipewire set Master 1+ toggle >/dev/null
         ;;
 esac