Remove is-* tags from blockquotes

pages/02.linux/05.kopia/default.en.md

@@ -38,4 +38,3 @@ Change compression
 `# kopia snapshot list (path)`  
 
 > [Check the "Getting Started" Page for more options](https://kopia.io/docs/getting-started/)
-{.is-info}

pages/02.linux/07.xcp-ng/03.xen-orchestra/default.en.md

@@ -4,7 +4,6 @@ title: 'Xen Orchestra'
 
 ## Installation
 > Use the script [XenOrchestraInstallerUpdater](https://github.com/ronivay/XenOrchestraInstallerUpdater) to install Xen Orchestra from sources.  
-{.is-info}
 
 ### Installation within VM
 The supported distibutions are listed in the Github README.  
@@ -30,7 +29,6 @@ A local SSH tunnel is established, forwarding port 443 on dom0 instead.
 One prerequisite is ssh-key based access to dom0 from the xen orchestra VM. See [SSH](/remote/ssh)  
 
 > Based on testing and [this forum post](https://xen-orchestra.com/forum/topic/528/connection-port-in-settings-servers-not-used-for-console) it is known the Xen API returns the dom0 public IP address for additional connections within Xen Orchestra. This includes the VM console and usage statistics for example.
-{.is-info}
 
 To work around this issue, a firewall rule can be used to redirect traffic outbound to dom0 on port 443 to the local ssh tunnel instead.  
 
@@ -86,7 +84,6 @@ To remove this rule again, edit `/etc/firewalld/direct.xml`
 This section provides documentation on basic firewall usage. For example, allowing port 22/tcp for ssh with `firewalld`.  
 
 > In general, [this guide by Digital Ocean](https://www.digitalocean.com/community/tutorials/how-to-set-up-a-firewall-using-firewalld-on-centos-7) provides a good starting point.  
-{.is-info}
 
 For this Host the services `http`, `https` and `ssh` are allowed.  
 
@@ -94,4 +91,3 @@ For this Host the services `http`, `https` and `ssh` are allowed.
 ### Exclude VM Disks from Backup
 To exclude disks from backup jobs, one can prepend the disk name with `[NOBAK]`  
 > Also see [the official documentation](https://xen-orchestra.com/docs/backups.html#exclude-disks)  
-{.is-info}

pages/02.linux/09.podman/default.en.md

@@ -69,4 +69,3 @@ WantedBy=timers.target
 `# systemctl enable --now podman-image-prune.timer`  
 
 > [Documentation](https://docs.podman.io/en/latest/markdown/podman-image-prune.1.html)
-{.is-info}

pages/02.linux/10.nextcloud/default.en.md

@@ -77,7 +77,6 @@ Add this following line:
 The main config file is `(nextcloud dir)/config/config.php`  
 #### Automatic Trash clearing
 > [See this page](https://bayton.org/docs/nextcloud/nextcloud-hoarding-trash-how-to-force-automatic-removal-of-deleted-items/) for more options  
-{.is-info}
 
 This settings keeps the files for 15 days, unless drive space is getting low.  
 In that case it delets them earlier.  
@@ -117,7 +116,6 @@ Dump database to file
 ``mysqldump --single-transaction -h [server] -u [username] -p[password] [db_name] > nextcloud-sqlbkp_`date +"%Y%m%d"`.bak``  
 
 > [Official documentation](https://docs.nextcloud.com/server/latest/admin_manual/maintenance/backup.html)  
-{.is-info}
 
 #### Backup Script
 ```
@@ -146,12 +144,11 @@ mariadb -h $server -u $username -p$password  -e "CREATE DATABASE nextcloud CHARA
 
 `mariadb -h $server -u $username -p$password $db_name < nextcloud-sqlbkp.bak`  
 
-> [Nextcloud documentation](https://docs.nextcloud.com/server/latest/admin_manual/maintenance/restore.html)  
+> [Nextcloud documentation](https://docs.nextcloud.com/server/latest/admin_manual/maintenance/restore.html)
-{.is-info}
 
 ## Collabora Online Container
 > Unfinished
-{.is-warning}
+
 ```
 # podman run -t -d --name collabora-online -p 9980:9980 \
     -e "extra_params=--o:ssl.enable=false" \
@@ -162,10 +159,10 @@ mariadb -h $server -u $username -p$password  -e "CREATE DATABASE nextcloud CHARA
 
 ## Onlyoffice Container
 > Unfinished
-{.is-warning}
+
 ```
 # podman run -it -d --name onlyoffice -p 9480:80 \
     --restart always \
     --label "io.containers.autoupdate=image" \
     docker.io/onlyoffice/documentserver:latest
-```
+```

pages/02.linux/13.wireguard/default.en.md

@@ -132,5 +132,4 @@ PersistentKeepalive = 5
 ## Iptables no local access ssh user
 > [Block outgoing network access for single user](https://www.cyberciti.biz/tips/block-outgoing-network-access-for-a-single-user-from-my-server-using-iptables.html)  
 > [Restrict internet access for user](https://unix.stackexchange.com/questions/21650/how-to-restrict-internet-access-for-a-particular-user-on-the-lan-using-iptables)  
-{.is-info}
 

pages/02.linux/14.powerdns/default.en.md

@@ -18,7 +18,6 @@ The config can be found under `/etc/powerdns/pdns.conf`
 
 For MySQL I chose `launch=gmysql`  
 > A [list of backends can be found here](https://doc.powerdns.com/authoritative/backends/index.html)  
-{.is-info}
 
 Add the following parameters below `launch=gmysql`  
 ```
@@ -95,10 +94,8 @@ To bind to all interfaces, use `local-address=::,0.0.0.0`
 ## DNSSEC
 ### Authoritative Server
 > *TODO*
-{.is-warning}
 
 > https://doc.powerdns.com/authoritative/dnssec/index.html  
-{.is-info}
 
 ### Recursor Server
 To fully enable DNSSEC, set `dnssec=process-no-validate` to `dnssec=validate`  
@@ -110,7 +107,6 @@ Show domains with disabled DNSSEC
 `# rec_control get-ntas`  
 
 > [DNSSEC Testing](https://wiki.debian.org/DNSSEC#Test_DNSSEC)
-{.is-info}
 
 ## WebGUI
 ### PowerDNS-Admin
@@ -152,4 +148,4 @@ WantedBy=multi-user.target
 ```
 
 `# systemctl daemon-reload`  
-`# systemctl enable --now powerdns-admin`  
+`# systemctl enable --now powerdns-admin`  

pages/02.linux/18.minecraft-server/default.en.md

@@ -32,7 +32,6 @@ Accept the EULA by editing `/etc/minecraft/forge-(version)/eula.txt`
 
 ## Systemd Service
 > Adapted from [this gist](https://gist.github.com/dotStart/ea0455714a0942474635)  
-{.is-info}
 
 `/etc/systemd/system/minecraft.service`  
 ```
@@ -64,7 +63,6 @@ WantedBy=multi-user.target
 
 ## Systemd Service with STDIN available
 > Based on [this stackexchange answer](https://unix.stackexchange.com/questions/598221/how-to-control-systemd-service-using-screen/612118#612118)  
-{.is-info}
 
 `/etc/systemd/system/minecraft.socket`  
 ```
@@ -108,4 +106,4 @@ To run commands, pipe commands into your socket.
 ```
 #!/usr/bin/env bash
 echo "$@" > /run/minecraft.stdin
-```
+```

pages/02.linux/19.step-ca/default.en.md

@@ -27,7 +27,6 @@ Initialize the step-cli client
 
 ## Create Certificates
 > [Official documentation](https://smallstep.com/docs/step-cli/basic-crypto-operations)  
-{.is-info}
 
 Enter the container  
 `# podman exec -it step-ca bash`  
@@ -49,9 +48,8 @@ Point your ACME client to `https://(domain/ip):9000/acme/(provisioner-name)/dire
 ## Device Truststore
 ### Arch Linux
 > [Archwiki Article on TLS](https://wiki.archlinux.org/title/Transport_Layer_Security#Add_a_certificate_to_a_trust_store)  
-{.is-info}
 
 Add new trust anchor  
 `# trust anchor (root ca.crt)`  
 List trust anchors  
-`$ trust list`  
+`$ trust list`  

pages/02.linux/21.gitea/default.en.md

@@ -30,7 +30,6 @@ podman run --name gitea -p 3000:3000 \
 
 The next few lines are used to set up ssh-redirection to gitea if it is used to clone a repo.  
 > See also the [official documentation](https://docs.gitea.io/en-us/install-with-docker/#sshing-shim-with-authorized_keys)
-{.is-info}
 
 `$ sudo -u git ssh-keygen -t rsa -b 4096 -C "Gitea Host Key"`  
 `$ sudo -u git cat /home/git/.ssh/id_rsa.pub | sudo -u git tee -a /home/git/.ssh/authorized_keys`  

pages/02.linux/22.grav/default.en.md

@@ -3,7 +3,6 @@ title: Grav
 ---
 
 > [Official Documentation](https://learn.getgrav.org/17)
-{.is-info}
 
 ## Requirements
 `# apt install nginx php php-fpm php-gd php-apcu php-yaml php-zip php-xml php-mbstring php-curl unzip`  
@@ -79,4 +78,4 @@ server {
     server_name DOMAIN_NAME;
     return 404;
 }
-``` 
+```