* Disable benchmark on forked repo
* only check owner on schedule event
* check owner on push also
* more readable as multi-line
* ternary won't work
* style++
* test++
* enable actions debug
* test--
* remove debug
* test++
* do debug where we can get logs
* test--
* this is driving me crazy
* correct github.event usage
* remove test condition
* correct github.event usage
* test++
* test--
* event_name is pull_request_target
* test++
* test--
* update ref checks
This will reproduce the issue in llama13b
{
'prompt': 'Q: hello world \nA: ',
'stop': ['\n'],
'temperature': 0.0,
'n_predict': 10,
'cache_prompt': True,
'n_probs': 10
}
* convert.py: add python logging instead of print()
* convert.py: verbose flag takes priority over dump flag log suppression
* convert.py: named instance logging
* convert.py: use explicit logger id string
* convert.py: convert extra print() to named logger
* convert.py: sys.stderr.write --> logger.error
* *.py: Convert all python scripts to use logging module
* requirements.txt: remove extra line
* flake8: update flake8 ignore and exclude to match ci settings
* gh-actions: add flake8-no-print to flake8 lint step
* pre-commit: add flake8-no-print to flake8 and also update pre-commit version
* convert-hf-to-gguf.py: print() to logger conversion
* *.py: logging basiconfig refactor to use conditional expression
* *.py: removed commented out logging
* fixup! *.py: logging basiconfig refactor to use conditional expression
* constant.py: logger.error then exit should be a raise exception instead
* *.py: Convert logger error and sys.exit() into a raise exception (for atypical error)
* gguf-convert-endian.py: refactor convert_byteorder() to use tqdm progressbar
* verify-checksum-model.py: This is the result of the program, it should be printed to stdout.
* compare-llama-bench.py: add blank line for readability during missing repo response
* reader.py: read_gguf_file() use print() over logging
* convert.py: warning goes to stderr and won't hurt the dump output
* gguf-dump.py: dump_metadata() should print to stdout
* convert-hf-to-gguf.py: print --> logger.debug or ValueError()
* verify-checksum-models.py: use print() for printing table
* *.py: refactor logging.basicConfig()
* gguf-py/gguf/*.py: use __name__ as logger name
Since they will be imported and not run directly.
* python-lint.yml: use .flake8 file instead
* constants.py: logger no longer required
* convert-hf-to-gguf.py: add additional logging
* convert-hf-to-gguf.py: print() --> logger
* *.py: fix flake8 warnings
* revert changes to convert-hf-to-gguf.py for get_name()
* convert-hf-to-gguf-update.py: use triple quoted f-string instead
* *.py: accidentally corrected the wrong line
* *.py: add compilade warning suggestions and style fixes
* llama : rename ctx to user_data in progress_callback
This commit renames the `ctx` parameter to `user_data` in the
`llama_progress_callback` typedef.
The motivation for this is that other callbacks use `user_data` or
`data`, and using `ctx` in this case might be confusing as it could be
confused with `llama_context`.
---------
Signed-off-by: Daniel Bevenius <daniel.bevenius@gmail.com>
* ggml : add ggml_flash_attn_ext API
* ggml : fix GQA support in ggml_flash_attn_ext
* ggml : online attention (CPU)
* metal : initial implementation
* metal : f16 precision
* metal : reduce branches
* metal : specialize for head size
* wip : 8 rows per simd group
* wip : 4 rows per simd group
* wip : template for rows per warp
* metal : parallelize across KV size
* metal : parallel reduce across heads
* metal : efficient flash_attn_f16 implementation
* metal : avoid redundant loads of the attention
* metal : scale and mask in matrix form
* metal : fix comment
* llama : avoid ggml_cast, use F32 query
* metal : add parallel reduce version (disabled)
* metal : move output into local memory + optimize
- the result from each simdgroup now stays in the registers
- significantly reduced SRAM usage
- more efficient skipping of -INF blocks
- avoid simdgroup barrier in hot loop
- add comments
* metal : add tests, fix scaling, support C > 32
* metal : improve precision
* ggml : fix f16 mad
* metal : minor
* metal : support Q > 8
* tests : add ATTN tests
* metal : disable buffer allocation logs
* tests : more
* metal : faster inner loop for C == 32
* metal : fix array initialization
* tests : ifdef
* ggml : switch to padded F16 mask for ggml_soft_max, ggml_flash_attn_ext
* ggml : fix ggml_soft_max mask requirement
* cuda : fix soft_max to use correct mask size
* cuda : add flash_attn kernel (wip)
* metal : optimize softmax for C > 32
* metal : optimize softmax
* tests : minor fix
* cuda : avoid zeroing fragments
* tests : update dims
* cuda : fix __hisinf() result check
* cuda : avoid warp_reduce for smax
* cuda : use int instead of int64_t
Noticeably improves performance (thanks to Johannes)
* cuda : make loops use the same loop values
Thanks Johannes again for the tip
* cuda : unroll some of the loops
* cuda : avoid __hisinf branches
* cuda : use half2 in softmax
* cuda : switch to 1 warp for bs > 16
* cuda : speed-up reduce part of the kernel
* cuda : unroll Q*K^T loop
* cuda : fix -INF block check
* cuda : simplify softmax
* cuda : fix matrix names
* cuda : minor
* llama : adapt to F16 KQ_pos
* llama : adapt new models to F16 KQ_mask
* ggml : fix F16 store (ARM NEON)
* llama : fix type of KQ_mask and KQ_pos
* ggml : fix CPU soft_max
* tests : add hs=256
* cuda : fix build
* metal : improve perf via smaller int registers
* cuda : adapt soft_max to F16 mask and pos
* CUDA: faster FlashAttention, kernel for bs == 1
* 16 cols for Phi-2
* no vec for hs, no hs==256 ncols==32 for Volta
* adjust kernel selection logic
* 4 warps, 256 stride for all D
* no ncols == 64
* Multiple parallel blocks for batch size 1
* fix compile warnings
* fix excessive KQ_b loads
* fix cmake build
* fix KV cache padding, NaN from INFINITY (#6438)
* llama : flash_attn cparam + fix defrag
* server: support flash_attn param
* server: bench: enable flash_attn param
* CUDA: refactor host code, dyn. par. blocks
* fix flash_attn_vec_f16 race condition
* flush softmax exp below threshold to 0
* store temp KQ in registers
* Calculate KQ as FP32 if KQV has GGML_PREC_F32
* Add __hgt2_mask implementation for CUDA 11
* fix KQ FP32 precision fpr parallel_blocks > 1
* llama-bench : add -fa,--flash-attn arg
* metal : add BS=1 kernel for flash attention (#6508)
* metal : add BS=1 kernel for flash attention (wip)
* metal : support more than 1 warps
* metal : opts
* metal : opt
* metal : switch to parallel reduce
* metal : reduce registers
* metal : simplify
* metal : initial FA vec kernel
* metal : use F32 attention accumulators
* batched-bench : add fattn arg
* llama : simplify llama_build_kv_store
ggml-ci
* llama : adapt build_olmo to changes
* ggml : fix arm fp16 store on windows
* metal : clean-up
* metal : clean-up kernel code
* metal : minor
* tests : remove benchmarks
ggml-ci
* ggml : fix avx512 const correctness
ggml-ci
* ggml : fix soft_max with bias on CPU
ggml-ci
* common : print --flash-attn in help
* ggml : fix num dimensions in ggml_flash_attn_ext
* llama : force disable flash attention for incompatible models
* ggml : ggml_soft_max support F16/F32 mask/pos
ggml-ci
* cuda : uint -> uint32_t
* cuda : "constexpr dim3" -> "const dim3"
ggml-ci
* cuda : try to fix __hgt2_mask
ggml-ci
* ggml : add TODO's for F16/F32 mask/pos support in other backends
* llama : replace bool need_kq_pos with use_alibi
* llama : prep ALiBi support for BERT models
ggml-ci
* llama : fix n_batch requirements
ggml-ci
* cont
* server : add help for --flash-attn arg
* llama : disable FA for AMD
* tests : remove TMP_ATTN_BENCH
ggml-ci
* llama : support save/load state with FA enabled
ggml-ci
* ci : add CUDA save-load-state tests
ggml-ci
* llama : llama_kv_cache_clear zeroes data + fix save-load seq
ggml-ci
* llama : fix copy-paste errors, add TODO
* llama : disallow incompatible states
* llama : update llama_state_get_size after v_trans field
* metal : remove tmp log
* llama : add static reminder for llama_state_get_size
* metal : fix max nsg
ggml-ci
* ci : fix arg order
ggml-ci
---------
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
Co-authored-by: Pierrick HYMBERT <pierrick.hymbert@gmail.com>
* Cleaning up integration tests to share code between tests and make it simpler to add new tests.
* Add tests around quantifiers to ensure both matching and non-matching compliance.
* Add slightly more complex grammar with quantifiers to test references with quantifiers.
* Fixing build when C++17 is not present.
* Separating test calls to give more helpful stack traces on failure. Adding verbose messages to give visibility for what is being tested.
* Adding quotes around strings to explicitly show whitespace
* Removing trailing whitespace.
* Implementing suggestions from @ochafik -- grammars and test strings now print and flush before tests to aid in debugging segfaults and whatnot.
* Cleaning up forgotten symbols. Modifying simple test to use test harness. Added comments for more verbose descriptions of what each test is accomplishing.
* Unicode symbol modifications to hopefully make log easier to parse visually.
