llama.cpp/grammars/README.md

# GBNF Guide

GBNF (GGML BNF) is a format for defining [formal grammars](https://en.wikipedia.org/wiki/Formal_grammar) to constrain model outputs in `llama.cpp`. For example, you can use it to force the model to generate valid JSON, or speak only in emojis. GBNF grammars are supported in various ways in `examples/main` and `examples/server`.

## Background

[Bakus-Naur Form (BNF)](https://en.wikipedia.org/wiki/Backus%E2%80%93Naur_form) is a notation for describing the syntax of formal languages like programming languages, file formats, and protocols. GBNF is an extension of BNF that primarily adds a few modern regex-like features.

## Basics

In GBNF, we define *production rules* that specify how a *non-terminal* (rule name) can be replaced with sequences of *terminals* (characters, specifically Unicode [code points](https://en.wikipedia.org/wiki/Code_point)) and other non-terminals. The basic format of a production rule is `nonterminal ::= sequence...`.

## Example

Before going deeper, let's look at some of the features demonstrated in `grammars/chess.gbnf`, a small chess notation grammar:
```
# `root` specifies the pattern for the overall output
root ::= (
    # it must start with the characters "1. " followed by a sequence
    # of characters that match the `move` rule, followed by a space, followed
    # by another move, and then a newline
    "1. " move " " move "\n"

    # it's followed by one or more subsequent moves, numbered with one or two digits
    ([1-9] [0-9]? ". " move " " move "\n")+
)

# `move` is an abstract representation, which can be a pawn, nonpawn, or castle.
# The `[+#]?` denotes the possibility of checking or mate signs after moves
move ::= (pawn | nonpawn | castle) [+#]?

pawn ::= ...
nonpawn ::= ...
castle ::= ...
```

## Non-Terminals and Terminals

Non-terminal symbols (rule names) stand for a pattern of terminals and other non-terminals. They are required to be a dashed lowercase word, like `move`, `castle`, or `check-mate`.

Terminals are actual characters ([code points](https://en.wikipedia.org/wiki/Code_point)). They can be specified as a sequence like `"1"` or `"O-O"` or as ranges like `[1-9]` or `[NBKQR]`.

## Characters and character ranges

Terminals support the full range of Unicode. Unicode characters can be specified directly in the grammar, for example `hiragana ::= [ぁ-ゟ]`, or with escapes: 8-bit (`\xXX`), 16-bit (`\uXXXX`) or 32-bit (`\UXXXXXXXX`).

Character ranges can be negated with `^`:
```
single-line ::= [^\n]+ "\n"`
```

## Sequences and Alternatives

The order of symbols in a sequence matters. For example, in `"1. " move " " move "\n"`, the `"1. "` must come before the first `move`, etc.

Alternatives, denoted by `|`, give different sequences that are acceptable. For example, in `move ::= pawn | nonpawn | castle`, `move` can be a `pawn` move, a `nonpawn` move, or a `castle`.

Parentheses `()` can be used to group sequences, which allows for embedding alternatives in a larger rule or applying repetition and optional symbols (below) to a sequence.

## Repetition and Optional Symbols

- `*` after a symbol or sequence means that it can be repeated zero or more times (equivalent to `{0,}`).
- `+` denotes that the symbol or sequence should appear one or more times (equivalent to `{1,}`).
- `?` makes the preceding symbol or sequence optional (equivalent to `{0,1}`).
- `{m}` repeats the precedent symbol or sequence exactly `m` times
- `{m,}` repeats the precedent symbol or sequence at least `m` times
- `{m,n}` repeats the precedent symbol or sequence at between `m` and `n` times (included)
- `{0,n}` repeats the precedent symbol or sequence at most `n` times (included)

## Comments and newlines

Comments can be specified with `#`:
```
# defines optional whitespace
ws ::= [ \t\n]+
```

Newlines are allowed between rules and between symbols or sequences nested inside parentheses. Additionally, a newline after an alternate marker `|` will continue the current rule, even outside of parentheses.

## The root rule

In a full grammar, the `root` rule always defines the starting point of the grammar. In other words, it specifies what the entire output must match.

```
# a grammar for lists
root ::= ("- " item)+
item ::= [^\n]+ "\n"
```

## Next steps

This guide provides a brief overview. Check out the GBNF files in this directory (`grammars/`) for examples of full grammars. You can try them out with:
```
./llama-cli -m <model> --grammar-file grammars/some-grammar.gbnf -p 'Some prompt'
```

`llama.cpp` can also convert JSON schemas to grammars either ahead of time or at each request, see below.

## Troubleshooting

Grammars currently have performance gotchas (see https://github.com/ggerganov/llama.cpp/issues/4218).

### Efficient optional repetitions

A common pattern is to allow repetitions of a pattern `x` up to N times.

While semantically correct, the syntax `x? x? x?.... x?` (with N repetitions) may result in extremely slow sampling. Instead, you can write `x{0,N}` (or `(x (x (x ... (x)?...)?)?)?` w/ N-deep nesting in earlier llama.cpp versions).

## Using GBNF grammars

You can use GBNF grammars:

- In [llama-server](../examples/server)'s completion endpoints, passed as the `grammar` body field
- In [llama-cli](../examples/main), passed as the `--grammar` & `--grammar-file` flags
- With [llama-gbnf-validator](../examples/gbnf-validator) tool, to test them against strings.

## JSON Schemas → GBNF

`llama.cpp` supports converting a subset of https://json-schema.org/ to GBNF grammars:

- In [llama-server](../examples/server):
    - For any completion endpoints, passed as the `json_schema` body field
    - For the `/chat/completions` endpoint, passed inside the `result_format` body field (e.g. `{"type", "json_object", "schema": {"items": {}}}`)
- In [llama-cli](../examples/main), passed as the `--json` / `-j` flag
- To convert to a grammar ahead of time:
    - in CLI, with [examples/json_schema_to_grammar.py](../examples/json_schema_to_grammar.py)
    - in JavaScript with [json-schema-to-grammar.mjs](../examples/server/public/json-schema-to-grammar.mjs) (this is used by the [server](../examples/server)'s Web UI)

Take a look at [tests](../../tests/test-json-schema-to-grammar.cpp) to see which features are likely supported (you'll also find usage examples in https://github.com/ggerganov/llama.cpp/pull/5978, https://github.com/ggerganov/llama.cpp/pull/6659 & https://github.com/ggerganov/llama.cpp/pull/6555).

Here is also a non-exhaustive list of **unsupported** features:

- `additionalProperties`: to be fixed in https://github.com/ggerganov/llama.cpp/pull/7840
- `minimum`, `exclusiveMinimum`, `maximum`, `exclusiveMaximum`
    - `integer` constraints to be implemented in https://github.com/ggerganov/llama.cpp/pull/7797
- Remote `$ref`s in the C++ version (Python & JavaScript versions fetch https refs)
- Mixing `properties` w/ `anyOf` / `oneOf` in the same type (https://github.com/ggerganov/llama.cpp/issues/7703)
- `string` formats `uri`, `email`
- [`contains`](https://json-schema.org/draft/2020-12/json-schema-core#name-contains) / `minContains`
- `uniqueItems`
- `$anchor` (cf. [dereferencing](https://json-schema.org/draft/2020-12/json-schema-core#name-dereferencing))
- [`not`](https://json-schema.org/draft/2020-12/json-schema-core#name-not)
- [Conditionals](https://json-schema.org/draft/2020-12/json-schema-core#name-keywords-for-applying-subsche) `if` / `then` / `else` / `dependentSchemas`
- [`patternProperties`](https://json-schema.org/draft/2020-12/json-schema-core#name-patternproperties)