Mirrors/text-generation-webui
1
0
Fork 0
mirror of https://github.com/oobabooga/text-generation-webui.git synced 2024-11-21 23:57:58 +01:00
Code Issues Packages Projects Releases Wiki Activity
7b9ad643a0
text-generation-webui/docs/One-Click-Installers.md
oobabooga c33a94e381 Rename doc file
2023-09-22 12:17:47 -07:00

2.2 KiB
Raw Blame History

Additional one-click installers info

Using an AMD GPU in Linux

Requires ROCm SDK 5.4.2 or 5.4.3 to be installed. Some systems may also need: sudo apt-get install libstdc++-12-dev

Edit the "one_click.py" script using a text editor and un-comment and modify the lines near the top of the script according to your setup. In particular, modify the os.environ["ROCM_PATH"] = '/opt/rocm' line to point to your ROCm installation.

WSL instructions

If you do not have WSL installed, see here: https://learn.microsoft.com/en-us/windows/wsl/install

If you want to install Linux to a drive other than C Open powershell and enter these commands:

cd D:\Path\To\Linux $ProgressPreference = 'SilentlyContinue' Invoke-WebRequest -Uri -OutFile Linux.appx -UseBasicParsing mv Linux.appx Linux.zip

Then open Linux.zip and you should see several .appx files inside. The one with _x64.appx contains the exe installer that you need. Extract the contents of that _x64.appx file and run .exe to install.

Linux Distro URLs: https://learn.microsoft.com/en-us/windows/wsl/install-manual#downloading-distributions

ENSURE THAT THE WSL LINUX DISTRO THAT YOU WISH TO USE IS SET AS THE DEFAULT!

Do this by using these commands: wsl -l wsl -s

Web UI Installation

Run the "start" script. By default it will install the web UI in WSL: /home/{username}/text-gen-install

To launch the web UI in the future after it is already installed, run the same "start" script. Ensure that one_click.py and wsl.sh are next to it!

Updating the web UI

As an alternative to running the "update" script, you can also run "wsl.sh update" in WSL.

Running an interactive shell

As an alternative to running the "cmd" script, you can also run "wsl.sh cmd" in WSL.

Changing the default install location

To change this, you will need to edit the scripts as follows: wsl.sh: line ~22 INSTALL_DIR="/path/to/install/dir"

Keep in mind that there is a long-standing bug in WSL that significantly slows drive read/write speeds when using a physical drive as opposed to the virtual one that Linux is installed in.